Call:
416-433-9484

Email:

 

CR1200 PRECISION CUT PIPE INSULATION

Precise, Uniform & Consistent Pipe Insultion

  • Pipe insulation is designed using CAD/CAM technology producing exact dimensional consistency.
  • The smooth outer surface provides an ideal substrate for jacketing applications.
  • Pipe insulation can be offered as a one piece hinged product with a tongue and groove joint to ensure reduction of thermal loss through the joint.
  • Pipe insulation is also available as a 2 piece product for large pipe applications.
  • Pipe insulation is fabricated from mineral wool insulation made from basalt rock and slag. This results in high temperature pipe insulation.
  • Pipe insulation is designed for operating temperatures from below ambient to 800°F (427°C).
  • Mineral wool insulation incorporates an additive which makes the insulation water repellent yet vapour permeable.

THERMALLY EFFICIENT & LIGHTWEIGHT

General Product Information

  • Fabricated using mineral insulation product that provides thermal and acoustical performance and a higher compressive strength for applications requiring rigidity yet lightweight.
  • Produced to fit precise pipe and tubing sizes for commercial and industrial applications.
  • Fabricated in 4' sections for iron pipe size 1/2" to 34" NPS, copper tube sizes 5/8" to 12-1/8" NPS. Available in single layer and double layered nesting combinations.
  • Mineral wool insulations incorporates an additive which makes the
    insulation water repellent yet vapor permeable.
    PRECISE, UNIFORM & CONSISTENT PIPE INSULATION
    General Product Information
  • Fabricated using mineral insulation product that provides
    thermal and acoustical performance and a higher compressive
    strength for applications requiring greater rigidity yet lightweight.
  • Produced to fit precise pipe and tubing sizes for commercial and
    industrial applications.
  • Fabricated in 4’ sections for: iron pipe size 1/2” to 34” NPS, copper
    tube sizes 5/8” to 12 1/8” NPS. Available in single layer and double
    layered nesting combinations.
  • Furnished with no facing (plain). Optional for all pipe sizes are
    ASJ/SSL (all service jacket with self-sealing-lap) other jacketing such
    as FSK (foil-scrim-kraft) are available upon request.

CAUTION: for high temperature applications sufficient insulation
thickness must be used to maintain outer surface temperatures below
240ºF (115ºC) for SAJ and FSK facings.

MATERIAL SPECIFICATION

Mineral Wool

  • Density (Nominal) - 8 lb
  • Fire Characteristics - CAN/ULC - S102 (E84)
    Flame Spread = 5, Smoked Developed = 0
  • CAN/ULC - S114 (E136) - Non-Combustible
  • Standard for Thermal Insulation Mineral Fibre - ASTM-C-612
    Conforms to CAN/CSA-A 101M
  • Non-Corrosive - (ASTM C692, ASTM C7956 AND ASTM C871)
  • Moisture Absorption - Less than 0.1% by Volume (ASTM C553, Section 14)
  • NRC-Noise Reduction Coefficient - ASTMC423 AND C795
  • Jacketing: ASJ and/or FSK - ASTM C1136 - Underwriters Laboratories - UL-723
  • Consult Manufacturer for Limitations under elevated temperature conditions.

Download PDF